ecm tcxo crystal oscillator ecm electronics limited, penmaen house, ashington, west sussex, rh20 3jr, uk tel: +44(0)1903 892810: fax: +44(0)1903 892738. email: ecm@ecmelectronics.co.uk although we have attempted to accurately reflect the products we market. ecm reserve the right without prior notice to discontinue any product or make design changes we believe necessary. 1mhz to 20mhz wide temperature options competitive prices internal or external trimmer custom options parameter specification notes frequency range 1.0mhz to 20.0mhz specify temperature stability +/-0.2ppm +15 0 c to+35 0 c (a) +/-0.5ppm +15 0 c to+35 0 c (b) +/-0.5ppm 0 0 c to+55 0 c (c) +/-1.0ppm 0 0 c to+55 0 c (d) +/-0.5ppm -10 0 c to+60 0 c (e) +/-1.0ppm -10 0 c to+60 0 c (f) +/-2.0ppm -10 0 c to+60 0 c (g) +/-2.0ppm -20 0 c to+70 0 c (h) specify aging +/-1.0ppm / yr standard supply voltage +5vdc (x) +12vdc (y) +15 vdc (z) specify supply current 15ma (max) output 10lsttl (t) cmos (c) clipped sine 2v p-p 1k w load (z) sinewave 0.6vrms 1k w load (s) specify operating temp -20 0 c to +70 0 c storage temp -40 0 c to +100 0 c trim range +/-5ppm min 10k w trimmer internal (i) external (e) specify part numbering :ECT107 c 8.192 f x e type output frequency stability supply voltage trimmer environmental & mechanical temperature cycle jis-c-6701 shock jis-c-6701 vibration jis-c-6701 soldering condition 5 seconds @ 250 0 c 3 seconds @ 350 0 c ECT107 series a b c d e f g 36.0 26.0 10.0 7.5 8.9 25.4 0.8 dimensions in mm pin 1 2 3 4 5 connection trimmer* vcc output 0v * external if used
|
